III. :
Mix this masterbatch thoroughly with the moisture-affected plastic raw material, and the material is then ready for processing into finished products. For blow moulding applications, the recommended addition rate is 1.0%–2.0%; for sheet extrusion and injection moulding applications, the recommended addition rate is 2%–5%. The specific addition rate should be determined by the user based on the degree of moisture absorption in the plastic.
IV. Scope of Application: Widely used in film products, bag products, sheet products, tubular products and injection-moulded products, etc.
V. Technical Specifications: Test Item Specification Appearance: Greyish-white granules, well plasticised Density: (g/cm³) 1.5±0.1 Melting point: (°C) 100–110 Melt flow rate (g/10 min): 15.0–20.0 Volatile matter (%): 1.5±0.5
VI. Points to note regarding high-efficiency defoaming masterbatches:
1. Avoid exposing this masterbatch to moisture or allowing it to absorb moisture before use;
2. It is best to prepare the ingredients just before use;
3. Do not heat or dry the material together with damp plastic, as this may result in poor quality during processing;
4. Check that the packaging is intact before opening it, and heat-seal any unused masterbatch as soon as possible.
VII. Storage conditions: Store in a clean, well-ventilated, dry, cool and tidy place. Do not store masterbatch in damaged packaging or with the container left open; avoid exposure to direct sunlight and rain.
VIII. Product Packaging: The outer packaging consists of a reinforced cardboard box, whilst the inner packaging consists of plastic bags. Each box has a net weight of 25 kilograms, with the inner packaging comprising five smaller bags, each weighing 5 kilograms.
IX. Shelf life: Six months from the date of manufacture.

Follow the WeChat official account