Sumlong explains the basics of colour masterbatches and how to use them.

1. What are colour masterbatches?

Colour masterbatch, also known as a colour concentrate, is a specialised colouring agent for new types of polymer materials, also referred to as a pigment preparation. It consists of three basic components: pigments or dyes, carriers and additives. It is an aggregate produced by uniformly embedding an exceptionally high concentration of pigment or dye within a resin; it may be referred to as a pigment concentrate (Pigment Concentration), and consequently possesses a higher tinting strength than the pigment itself. Put simply, a colour masterbatch is an aggregate produced by uniformly embedding an exceptionally high concentration of pigment or dye within a resin.

II. What are the basic components of colour masterbatch?

The basic components of colour masterbatch are:

1. Pigments or dyes

Pigments are further classified into organic and inorganic pigments.

Commonly used organic pigments include: phthalocyanine red, phthalocyanine blue, phthalocyanine green, lightfast red, macromolecular red, macromolecular yellow, permanent yellow, permanent violet and azo red, amongst others.

Commonly used inorganic pigments include: cadmium red, cadmium yellow, titanium white, carbon black, iron oxide red and iron oxide yellow, amongst others.

2. Carrier

It serves as the matrix for the colour masterbatch. Specialised colour masterbatches generally use the same resin as the finished product as the carrier, as this ensures the best compatibility between the two; however, the flow properties of the carrier must also be taken into account.

3. Dispersants

To ensure that pigments are evenly dispersed and do not re-agglomerate, the dispersant should have a melting point lower than that of the resin, good compatibility with the resin, and a good affinity for the pigments. The most commonly used dispersants are: low-molecular-weight polyethylene wax and stearates.

4. Additives

Products such as flame-retardant, gloss-enhancing, antibacterial, antistatic and antioxidant types; unless specifically requested by the customer, colour masterbatches do not generally contain the aforementioned additives.

3. What types and grades of colour masterbatches are there?

The following are some of the most commonly used methods for classifying colour masterbatches:

Classified by substrate: e.g. PE colour masterbatches, PP colour masterbatches, ABS colour masterbatches, PVC colour masterbatches, EVA colour masterbatches, etc.

Classified by application: e.g. injection moulding colour concentrates, blow moulding colour concentrates, spinning colour concentrates, etc.

Each variety can be further subdivided into different grades, such as:

1. High-grade injection masterbatch:

Used for cosmetic packaging, toys, electrical appliance casings and other high-end products.

2. Standard injection masterbatch:

Used for general-purpose everyday plastic items, industrial containers and the like.

3. High-grade film-blowing masterbatch:

For blow moulding and colouring of ultra-thin products.

4. Standard film-blowing masterbatch:

Used for blow-moulding and colouring of general-purpose packaging bags and woven sacks.

5. Spinning masterbatch:

Used for colouring textile fibres during the spinning process, these masterbatch pigments feature fine particles, high concentration and strong colouring power, as well as good heat and light resistance.

6. Low-grade colour masterbatch:

Used in the manufacture of low-grade products where colour quality is not a major consideration, such as rubbish bins and low-grade containers.

7. Specialised colour masterbatches:

These are colour masterbatches manufactured using the same type of plastic as the carrier, based on the plastic grade specified by the user for the end product. For example, PP colour masterbatches and ABS colour masterbatches use PP and ABS respectively as the carrier.

Universal colour masterbatch: This also uses a specific resin (often a low-melting-point PE) as a carrier, but it can be used to colour resins other than its carrier resin.

8. General-purpose colour masterbatches

General-purpose colour masterbatches are relatively simple and convenient, but they have a number of drawbacks; users are therefore advised to opt for specialised colour masterbatches.

The heat resistance rating of speciality colour masterbatches is generally compatible with the plastic used in the finished products, and they can be used with confidence at normal temperatures. However, discolouration of varying degrees may occur in the following circumstances: firstly, if the temperature exceeds the normal range; and secondly, if the equipment is left idle for too long.

9. Colour masterbatch colouring offers the following advantages over pellet colouring:

9.1. Colouring and product processing are carried out in a single operation, thereby avoiding the heating process involved in colouring during pelletisation, which helps to preserve the quality of the plastic products.

9.2. Minimise the production process for plastic products.

9.3. Significant energy savings can be achieved

IV. Why use colour masterbatches?

The use of colour masterbatches offers the following advantages:

1. To improve the dispersion of pigments in the product:

A colour masterbatch is a compound produced by uniformly dispersing an excess quantity of pigment within a resin.

During the production of colour masterbatches, pigments must undergo a refining process to improve their dispersibility and tinting strength. The carrier used in specialised colour masterbatches is of the same plastic grade as the finished product, ensuring good compatibility; when heated and melted, the pigment particles disperse effectively within the plastic of the finished product.

2. Helps to maintain the chemical stability of the pigment:

If pigments are used directly, they come into direct contact with the air during storage and use, which can lead to moisture absorption and oxidation. However, when incorporated into a colour masterbatch, the resin carrier isolates the pigments from the air and moisture, thereby ensuring that the quality of the pigments remains stable over the long term.

3. Ensuring colour consistency in the finished products:

Colour masterbatch pellets are similar in size to resin pellets, making them easier and more accurate to measure; they do not stick to the container during mixing and blend more evenly with the resin. This ensures a consistent addition rate, thereby guaranteeing the consistency of the finished product’s colour.

4. Protecting the health of operators:

Pigments are generally in powder form; they tend to become airborne when added or mixed, and if inhaled, they can pose a health risk to operators.

5. Keep the environment clean and ensure that utensils remain free from contamination:

6. The process is straightforward, colour changes are easy to make, and it saves time and raw materials: