Colour masterbatches consist of a carrier resin, fillers and various additives. The levels of additives or the proportion of fillers in the masterbatch are several to over ten times higher than the quantities actually required in the final plastic product. During the moulding process, the ratio of colour masterbatch to matrix resin must be adjusted based on the content of the relevant components in the masterbatch and the quantity required for the actual product. The fillers primarily used in polyolefin-filled colour masterbatches are heavy calcium carbonate, which provides the best filling effect; these are followed by inorganic fillers such as talc, kaolin and wollastonite powder. For any inorganic filler, particle size and particle size distribution are important technical indicators; generally, the smaller the particle size and the narrower the distribution, the better.
A colour masterbatch is a compound produced by uniformly dispersing an excess amount of pigment or dye within a resin. What are the basic components and areas of application for colour masterbatches? Let us explain.
During processing, by blending a small amount of colour masterbatch with uncoloured resin, it is possible to produce coloured resin or finished products with the desired pigment concentration.
Basic components of colour masterbatch:
1. Pigments or dyes
Pigments are further classified into organic and inorganic pigments.
Commonly used organic pigments include: phthalocyanine red, phthalocyanine blue, phthalocyanine green, lightfast red, macromolecular red, macromolecular yellow, permanent yellow, permanent violet and azo red, amongst others.
Commonly used inorganic pigments include: cadmium red, cadmium yellow, titanium dioxide, carbon black, iron oxide red and iron oxide yellow.
2. Carrier
The carrier serves as the matrix for the colour masterbatch. For specialised colour masterbatches, the resin used as the carrier is generally the same as that of the end product, as this ensures the best compatibility between the two; however, the flow properties of the carrier must also be taken into account.
3. Dispersants
Dispersants promote the uniform dispersion of pigments and prevent them from agglomerating. The melting point of a dispersant should be lower than that of the resin; it should be highly compatible with the resin and have good affinity with the pigments. The most commonly used dispersants are: low-molecular-weight polyethylene wax and stearates.
4. Additives
Products such as flame retardants, gloss enhancers, antibacterial agents, antistatic agents and antioxidants are not generally included in colour masterbatches, unless specifically requested by the customer.
Applications
It is widely used in resins such as polyethylene, polypropylene, polystyrene, ABS, nylon, PC, PMMA and PET, and is used to produce a wide variety of products, including fibres in a range of colours, clothing, everyday plastic items, wires and cables, domestic appliances, agricultural films, automotive components and healthcare equipment.
Follow the WeChat official account